Agriculture 2038R

Features
- Powerful and fuel-efficient Tier IV Yanmar engine
- AutoConnectâ„¢ Drive-over Mower Decks up to 72 inches
- New model is on larger, heavier frame for added stability
- Standard cruise control, 12-V outlet and premium seating
Specifications
Key Specs
Engine power (gross) | 27.4 kW 37.3 hp SAE J1995 rated power |
Power take-off (PTO) power | 22.7 kW 30.4 hp |
Steering hydraulics | 15 L/min 4 gpm |
Implement hydraulics | 20.2 L/min 5.3 gpm |
Hitch type | Category 1 |
Lift capacity, 24-in. behind link arms | 615 kg 1356 lb |
Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
Cruise control | Standard |
Approximate shipping weight (open-station; cab) | 1105 kg 2436 lb |
Wheelbase | 172.5 cm 67.9 in. |
Engine
Family | GYDXL1.57TDA |
Manufacturer | Yanmar |
Engine model | 3TNV88C-NJT |
Engine power (gross) | 27.4 kW 37.3 hp SAE J1995 rated power |
Power take-off (PTO) power | 22.7 kW 30.4 hp |
Rated engine speed | 2500 rpm |
Type | Direct Injection |
Injection pump type | Direct Injection |
Aspiration | Turbocharged |
Emissions compliance | Final Tier 4 |
Cylinders/displacement | 3 / 1.568 L 3 / 95.8 cu in. |
Number of cylinders | Three |
Cylinder liners | Cast-in-block |
Bore and stroke | 86x90 mm 3.39x3.54 in. |
Compression ratio | 19.1:1 |
Lubrication | Pressurized |
Cooling system | Water pump |
Air cleaner | Dual element |
Engine torque at rated speed | 101.4 Nm 74.8 lb-ft |
Fuel tank capacity | 32 L 8.5 U.S. gal. |
Electrical
Battery size | 500 CCA |
Alternator (12-V) | 85 amp |
Starter size | 1.4 kW 1.9 hp |
Fuel system
Type | Direct Injection |
Transmission
Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
Final drive | Bull Gear |
Brakes | Wet disc |
Steering | Power steering |
Axle capacity | Front 880 kg 1940 lb Rear 1089 kg 2400 lb |
Creeper | No |
Cruise control | Standard |
Differential lock | Yes |
Hydraulics
Type | Open center |
Pump rated output | Steering 15 L/min 4 gpm Implement 20.2 L/min 5.3 gpm 35.2 L/min 9.3 gpm |
Pump type | Gear |
Maximum operating pressure | 172.37 bar 2500 psi |
Draft control sensing | Position control |
Remote control valves available | Up to three |
3-point hitch
Type | Category 1 |
Lift capacity, 24-in. behind link arms | 615 kg 1356 lb |
Power take-off (PTO)
Standard | Rear - 540 rpm Mid - 2000 rpm |
Control | Independent |
Clutch | Independent |
Brake (for mid and rear PTO) | Wet disc |
Fluid capacities
Crankcase with filter | 4.5 L 4.8 qt |
Final drive
Type | Spur Gear |
Differential lock | Yes |
Operator station
Rollover protective structure | Type Foldable ASABE S478 |
Platform - flat/straddle | Flat |
Gear shift location - console/floor | Left-hand side |
Dimensions
Wheelbase | 172.5 cm 67.9 in. |
Turning radius with brakes | 2.75 m 9.02 ft |
Turning radius without brakes | 3 m 9.84 ft |
Approximate shipping weight (open-station; cab) | 1105 kg 2436 lb |
Tires
Front | R1 Ag 7.00-12 R3 Turf 23x8.50-14 R4 Industrial 23x8.50-14 R3 Turf Radial 200/60 R15 |
Rear | R1 Ag 12.4-16 R3 Turf 14-17.5 R4 Industrial 14-17.5 R3 Turf Radial 300/70 R20 |
Miscellaneous
Toolbox | Yes |
Tilt steering wheel | Yes |
12-V Outlet | Yes |