Agriculture 3025D
3 Series 3025D
Overview:
Meet the mighty three, our 3 Series Compact Tractors. This small tractor lineup features our NEW simple, heavy-hauling 25-43 HP* 3Ds, our value priced 24–37 HP* 3Es and our top-of-line 32–45 HP 3Rs. All 3s are designed for simplicity, comfort and great performance.
Features
- Standard 4wd for Maximum Traction
- Heavy Duty Gear Drive Transmission 8F/8R for heavy hauling
- On-board diagnostics including Service Advisor
- Category 1 3-Pt Hitch compatible with dozens of attachments
Specifications
Key Specs
| Engine power (gross) | 18.2 kW 24.7 hp |
| Power take-off (PTO) power | 14.9 kW 20 hp |
| Steering hydraulics | 14.4 L/min 3.8 gpm |
| Implement hydraulics | 19.2 L/min 5.1 gpm |
| Hitch type | Category 1 |
| Lift capacity, 24-in. behind link arms | 757.4 kg 1670 lb |
| Standard transmission; forward/reverse | 8F/8R synchromesh shuttle shift gear transmission |
| Cruise control | No |
| Approximate shipping weight (open-station; cab) | 1260 kg 2778 lb |
| Wheelbase | 157.4 cm 62 in. |
Engine
| Manufacturer | Yanmar |
| Engine model | 3TNV88F-EPJPT |
| Engine power (gross) | 18.2 kW 24.4 hp |
| Power take-off (PTO) power | 14.9 kW 20 hp |
| Rated engine speed | 2400 rpm |
| Injection pump type | Direct injection |
| Aspiration | Natural |
| Emissions compliance | Final Tier 4 |
| Cylinders/displacement | 3 / 1.64 L 3 / 100.2 cu in. |
| Number of cylinders | Three |
| Cylinder liners | Cast-in-block |
| Bore and stroke | 88 x 90 mm 3.46 x 3.54 in. |
| Compression ratio | 19.1:1 |
| Lubrication | Pressurized |
| Cooling system | Water pump |
| Air cleaner | Dual element |
| Engine torque at rated speed | 72.4 Nm 53.4 lb-ft |
| Fuel tank capacity | 36.7 L 9.7 U.S. gal. |
Electrical
| Battery size | 600 CCA |
| Alternator (12-V) | 55 amp |
| Starter size | 1.4 kW 1.9 hp |
Fuel system
| Type | Direct injection |
Transmission
| Standard transmission; forward/reverse | 8F/8R synchromesh shuttle shift gear transmission |
| Left-hand reverser | Yes |
| Transmission gear ranges | 4 gears and 2 ranges |
| Final drive | Spur Gear |
| Brakes | Wet disc |
| Steering | Power steering |
| Axle capacity | Front 880 kg 1940 lb Rear 1600 kg 3527 lb |
| Creeper | No |
| Cruise control | No |
| Differential lock | Yes |
Hydraulics
| Type | Open center |
| Pump rated output | Steering 14.4 L/min 3.8 gpm Implement 19.2 L/min 5.1 gpm 33.6 L/min 8.9 gpm |
| Pump type | Single gear |
| Maximum operating pressure | 172.4 bar 2500 psi |
| Draft control sensing | Position control |
| Remote control valves available | Up to two (optional) |
3-point hitch
| Type | Category 1 |
| Lift capacity, 24-in. behind link arms | 757.4 kg 1670 lb |
Power take-off (PTO)
| Standard | 540 rpm at 2400 rpm |
| Control | Mechanical |
| Clutch | Transmission |
| Brake (for mid and rear PTO) | Wet disc |
Fluid capacities
| Crankcase with filter | 4.5 L 4.8 qt |
| Transmission and hydraulic system | 33 L 34.8 qt |
Final drive
| Type | Bull Gear |
Operator station
| Rollover protective structure | Type Foldable ASABE S478 |
| Platform - flat/straddle | Semi-flat |
| Gear shift location - console/floor | Right-hand side |
Dimensions
| Wheelbase | 157.4 cm 62 in. |
| Front axle clearance | 35 cm 14 in. |
| Turning radius with brakes | 1.63 m 5.3 ft |
| Approximate shipping weight (open-station; cab) | 1260 kg 2778 lb |
Tires
| Front | Farm - 7-14 Turf - 27x8.5-15 R4 - 25x8.5-14 |
| Rear | Farm - 11.2-24 Turf - 41x14-20 R4 - 15-19.5 |
Miscellaneous
| Toolbox | Yes |
| Tilt steering wheel | No |
| 12-V Outlet | No |