Agriculture 3038E
3 Series 3038E
Overview:
Meet the mighty three, our 3 Series Compact Tractors. This small tractor lineup features our NEW simple, heavy-hauling 25-43 HP* 3Ds, our value priced 24–37 HP* 3Es and our top-of-line 32–45 HP 3Rs. All 3s are designed for simplicity, comfort and great performance.
Features
- Standard four-wheel drive(4WD) for maximum traction
- Hydro transmission with Twin Touch™ pedals for ease of use
- On-board diagnostics including Service Advisor
- Category 1 3-pt hitch compatible with dozens of implements
Specifications
Key Specs
| Engine power (gross) | 27.4 kW 37.2 hp |
| Power take-off (PTO) power | 22.4 kW 30 hp |
| Steering hydraulics | 15 L/min 4 gpm |
| Implement hydraulics | 20.2 L/min 5.3 gpm |
| Hitch type | Category 1 |
| Lift capacity, 24-in. behind link arms | 615.1 kg 1356 lb |
| Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
| Cruise control | Optional |
| Approximate shipping weight (open-station; cab) | 1007.9 kg 2222 lb |
| Wheelbase | 159.5 cm 62.8 in. |
Engine
| Family | FYDXL1.57TDA EYDXL1.57TDA GYDXL1.57TDA |
| Manufacturer | Yanmar |
| Engine model | 3TNV86CT-NJT |
| Engine power (gross) | 27.4 kW 37.2 hp |
| Power take-off (PTO) power | 22.4 kW 30 hp |
| Rated engine speed | 2500 rpm |
| Type | Diesel |
| Injection pump type | High pressure common rail direct injection |
| Aspiration | Turbocharged |
| Emissions compliance | Final Tier 4 |
| Cylinders/displacement | 3 / 1.57 L 3 / 95.7 cu in. |
| Number of cylinders | Three |
| Cylinder liners | Cast-in-block |
| Bore and stroke | 86 x 90 m 3.4 x 3.54 in. |
| Compression ratio | 19.1:1 |
| Lubrication | Pressurized |
| Cooling system | Water Pump |
| Air cleaner | Dual element |
| Engine torque at rated speed | 105 Nm 77.4 lb-ft |
| Fuel tank capacity | 28.5 L 7.5 gal. |
Electrical
| Battery size | 500 CCA |
| Alternator (12-V) | 55 amp |
| Starter size | 1.4 kW 1.9 hp |
Fuel system
| Type | High pressure common rail direct injection |
Transmission
| Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
| Left-hand reverser | No |
| Final drive | Bull Gear |
| Brakes | Wet disc |
| Steering | Power steering |
| Axle capacity | Front 798 kg 1760 lb Rear 1197 kg 2640 lb |
| Cruise control | Optional |
| Differential lock | Yes |
Hydraulics
| Type | Open center |
| Pump rated output | Steering 15 L/min 4 gpm Implement 20.2 L/min 5.3 gpm 35.2 L/min 9.3 gpm |
| Pump type | Dual gear |
| Maximum operating pressure | 172.4 bar 2500 psi |
| Draft control sensing | Position control |
| Remote control valves available | Up to two (optional) |
3-point hitch
| Type | Category 1 |
| Lift capacity, 24-in. behind link arms | 615.1 kg 1356 lb |
Power take-off (PTO)
| Standard | Rear - 540 rpm |
| Control | Independent |
| Clutch | Wet disk |
| Brake (for mid and rear PTO) | Wet disk |
Fluid capacities
| Crankcase with filter | 4.5 L 4.8 qt |
| Transmission and hydraulic system | 22 L 23.2 qt |
Final drive
| Type | Bull Gear |
| Differential lock | Yes |
Operator station
| Rollover protective structure | Type Foldable ASAE S478 |
| Platform - flat/straddle | Semi-flat |
| Gear shift location - console/floor | Left-hand side |
Dimensions
| Wheelbase | 159.5 cm 62.8 in. |
| Front axle clearance | 36.3 cm 14.3 in. |
| Turning radius without brakes | 2.9 m 9.4 ft |
| Approximate shipping weight (open-station; cab) | 1007.9 kg 2222 lb |
Tires
| Front | Farm - 7-14 Turf - 27x8.5-15 R4 - 25x8.5-14 R4 - 27x8.5-15 |
| Rear | Farm - 11.2-24 Turf - 41x14-20 R4 - 15-19.5 R4 - 43x16-20 |