Lawn & Garden Z915E

Features
- Heavy-duty frame provides strength and durability
- Michelin® X® Tweel® Turf airless radial tire technology for ZTrak™ Mowers eliminates downtime and reduces cost of operation
- Powerful 25.0-hp (18.6-kW) commercial-grade engine delivers class-leading performance and efficiency
- Durable hydrostatic drive train that delivers better cooling and provides easy access
- Two seat choices with ComfortGlide™ fore/aft suspension offer exceptional operator comfort
Specifications
Model | John Deere Z915E Ztrak Zero-Turn Mower |
KEY SPECS | |
Engine Manufacturer/model | CV742 |
Engine Power | Gross at 3,600 rpm: 25 hp (18.6 kW) |
Fuel tank capacity | 11.5 U.S. gal. (43.5 L) |
Mower deck Size | 48, 54, 60 in. (122, 137, 152 cm) |
Blade tip speed | Approximately 18,000 fpm (5,486 m/min) |
Transmission | Hydrostatic |
Speed range | 0-10 mph (0-16.1 km/h) |
Drive wheels | 24x9.5-12 (48 in.), 24x12-12 (54 in., 60 in.) |
Caster wheels | 13x5-6 |
Warranty | 36 months or 1200 hours, whichever comes first; First 24 months, no hour limitation |
ENGINE | |
Manufacturer/Model | CV742 |
Power | At 3,600 rpm, 25 hp (18.6 kW) |
Displacement | 45.6 cu in. (747 cc) |
Cylinders | Two |
Crankcase capacity | With filter, 2 U.S. qt (1.9 L) |
Oil filter | Full flow, replaceable |
Lubrication | Full pressure |
Cooling | Air |
Air cleaner | Pre-cleaner Yes Heavy-duty canister type with safety element |
FUEL SYSTEM | |
Fuel type | Gasoline |
Fuel consumption | Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr (4.2-7.2 L/hr) |
Fuel tank capacity | 11.5 U.S. gal. (43.5 L) |
Fuel tank switch/shut-off valve | Yes |
ELECTRICAL SYSTEM | |
Charge system | 15 amp |
Battery voltage | 12 V |
Cold cranking amp | 300 amp |
Hour meter | Standard, digital |
Operator presence starting system | Brake-N-Go (hand) |
DRIVETRAIN | |
Transmission | Hydrostatic |
Hydraulic pumps | |
Wheel motors | Tuff Torq heavy-duty integrated piston wheel motor |
Travel speed | Speed range 0-10 mph (0-16.1 km/h); Forward 0-10 mph (0-16.1 km/h); Reverse 0-4.5 mph (0-7.2 km/h) |
Speed and direction control | Twin levers |
Hydraulic capacity | 5.9 U.S. qt (5.6 L) |
Hydraulic oil cooler | |
Filter | Internal, replaceable |
BUYER'S NOTE | |
Warranty | 36 months or 1200 hours, whichever comes first; First 24 months, no hour limitation |
TIRES | |
Drive wheels | 24x9.5-12 (48 in.), 24x12-12 (54 in., 60 in.) |
Rear tires | |
Load rating | 4 PR |
BRAKES | |
Dynamic braking | Twin levers |
Park brake | Internal wet disk integrated in the transmission |
Park brake actuation | Hand brake |
PTO | |
Type | Electro-magnetic, 200 lb-ft (271 Nm) |
Drive | V-belt |
MOWER DECKS | |
Size | 48, 54, 60 in. (122, 137, 152 cm) |
Deck construction | One-piece stamped steel with reinforcements |
Deck thickness | 7 gauge 0.18 in. (4.6 mm) |
Discharge | Side |
Height-of-cut range | Increments 0.25 in. (0.64 cm); 1-5.5 in. (2.54-14 cm) |
Cutting width | 48, 54, 60 in. (122, 137, 152 cm) |
BLADES | |
Length | Varies by deck size |
Thickness | 0.25 in. (0.64 cm) |
Blade tip speed | Approximately 18,000 fpm (5,486 m/min) |
Number | Three |
WHEELS | |
Caster wheel type | Pneumatic Front |
Caster wheels | 13x5-6 |
Front anti-scalp rollers | RH, center, LH |
Rear anti-scalp rollers | Optional |
DIMENSIONS | |
Length | 84 in. (213 cm) |
Width | With chute down, 62, 68, 74 in. (157, 173, 188 cm) |
Height | With ROPS up, 73 in. (185 cm); With ROPS down, 47 in. (119 cm) |
Weight | 1,100 to 1,178 lb (499 to 534 kg) |
ADDITIONAL INFORMATION | |
Date collected | 23-May-2018 |