Search Inventory    Search Products & Site

Land Pride BB4512

Double tap to zoom



70 to 130 Hp range Fits a wide variety of tractors.
4 x 4 Square tube cross beam Square tubing is structurally strong. Helps keep the Drag Scraper square.
3/8" Heavy side panels with angle
reinforcement on the diagonal
Built heavy to handle tough jobs and to keep the side panels straight under side loads.
1/4" Formed moldboard with internal
brace bars and 3" x 3" x 3/8" angle
reinforcement at the cutting edge
Formed moldboard helps keeps materials flowing, decreases drag, lowers horsepower requirements, and speeds up work. Brace bars extending from crossbeams to lower moldboard keep the moldboard straight under heavy loads. Angle reinforcement at the cutting edge helps keep the cutting edge straight.
Side Panels have vertical gussets at
the front
Vertical gussets help keep the panels straight vertically under side loads.
1/2" x 6" Heat-treated, reversible
and replaceable cutting blade
Heat-treated high carbon steel for hardness giving the cutting blade long life. Reversible so both edges can be used before replacing the cutting blades.
24" High moldboard and side panels Has a high material capacity for doing a lot of work in a short time. BB4510 = 2 1/4 cu. yd. capacity and BB4512 = 2 3/4 cu. yd. capacity
5" Maximum cutting depth Can load the bucket quickly.
21" Dump clearance Capable of dumping a lot of material quickly.
Optional tilt allows blade point to
drop on the right side
Capable of making deep angle cuts in one pass.
See Specifications for actual depth of blade drop.
Optional weight tray Weight tray can be filled with 760 lbs. of concrete to help force the cutting blade into the material.


Specifications & Capacities  
Model Numbers Model BB4512
Horsepower rating 70 to 130 hp tractors.
Transport width 12' - 0 3/4"
Working width 12' - 0".
Capacity 2 3/4 cu. yds.
Weight with weight box
Standard axle:
Tilt axle:
Weights are without material in weight box
1,580 lbs.
1,700 lbs.
Weight of material in weight box 760 lbs. Level full with concrete
Depth of bucket 36" From front of side panel to cutting edge
Maximum cutting depth 5" Below grade
Dump clearance 21"
Maximum tilt depth to the right 8 1/4" Drop on blade point
Maximum tilt angle 3 1/2 Degrees
Tongue construction 4" x 4" Square tubing
Cross beam construction 4" x 4" Square tubing
Side panel construction 3/8" x 24" High x 40" deep with heavy angle reinforcement on the diagonal extending from lower front corner to upper back corner and corner gussets extending from cross beam to side panel
Moldboard construction Break formed 1/4" x 24" high
Cutting blades Reversible and replaceable 1/2" x 6" high carbon heat treated blade
Bucket reinforcement 3 Brace bars
Brace bars extend from crossbeam to lower moldboard.
Cutting blade reinforcement 3" x 3"x 3/8" Angle iron welded to the moldboard
Tires 15" Recapped ribbed implement tires on new wheels
Maximum transport speed 20 mph
Lift cylinder 3" bore x 8" stroke
Tilt cylinder 3" bore x 8" stroke
Hitch types Clevis hitch, swivel clevis hitch, or swivel ball hitch
Axle types Standard axle or tilt axle
Weight box Available for standard axle and tilt axle