Search Inventory    Search Products & Site

Land Pride RCM4615

Double tap to zoom



Features Benefits
Surpassed rugged industry standards All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures according to ISO 4254-13.
Factory assembled Saves customer set-up time and money. Adjustments should always be made by dealer.
7 Year gearbox warranty Shows confidence in gearbox integrity. (Years 6 & 7, parts only.)
Rugged heavy built gearboxes Capable of handling heavy cutting applications.
Gearbox seal protection Gearbox bottom seal protection for longer bearing life.
2 Piece shield on wing gearboxes Driveline grease zerks are easier to access.
LP Performance self-leveling hitch Reduces drawbar wear by keeping hitch level while going through ditches.
Low hitch weight on tractor tongue Ideal for smaller hp tractors by reducing the amount of weight on the drawbar.
Narrow A-frame hitch Allows for a tighter turning radius.
Adjustable park jack angle Park jack can be adjusted to be perpendicular to the ground.
Adjustable driveline hanger Serves as a support rest for the driveline when the cutter is unhooked from the tractor.
Assist operator when attaching driveline to power take-off shaft.
Input driveline: Cat. 6 CV Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint
allows for 80 degree turns without doing damage to the driveline.
2 3/8" Output gearbox shaft Large output shaft handles shock loads better.
Input driveline: Cat. 6 CV or Cat. 5 Conventional Holds up to shock loads and harsh mowing conditions. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline
Drivelines with slip-clutches:
Cat. 5 intermediate
Cat. 4 Wings
Driveline is sized right for the intended cutting capacity.
Slip-clutches will slip under load to minimize twist damage to driveline profiles.
Grease zerks on end caps of
driveline cross journals
Intermediate and wing driveline cross journals are easier to grease.
High blade tip speed Allows clean cutting of material & even distribution. See Specifications for actual FPM.
6" Blade overlap Eliminates skipping during turns.
Left wing rotates clockwise Better discharge of material. Picks up tractor tracks.
3/16" Round stump jumper Standard thick stump jumper material keeps damage to a minimum.
Smooth Top Design Allows for easy cleaning of deck.
Deck sheet tops are 100% welded Makes center decks and wing decks stronger.
1/4" Sidewall thickness Increased thickness reduces damage from objects being thrown into deck sidewalls.
Beveled skid shoes on wings Reduces gouging the ground when turning.
Hinged wing section Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
1" Solid hinge rod Larger diameter hinge gives greater strength to cutter and hinge area.
Wing transport lock Holds transport wing in the folded-up position in case of hydraulic pressure loss.
Enclosed front to rear dual leveling rods Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod.
5-Bolt hubs 5-Bolt hubs makes the wheel assembly more durable and longer lasting
Drain holes in wheel rims Allows water to drain from wheels mounted on the folded-up wing. Helps prevent paint deterioration and rusting to the wheel rims.
Spring-cushioned center axle Protects unit from bumps and ground shock, cushions loads on drawbar.
Replaceable wheel spindles Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove one bolt to replace damaged spindle.
Wheel options Laminated tires: Eliminates flats. Air-filled tires: Give better cushion while transporting. Foam-filled tires: Give better cushion while transporting & can’t go flat.
LP performance hitch option Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and
pivots about the tractor drawbar.
Bar-tite hitch option Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
Roadway light kit option Allows operator to transport on public roads safer.
Deck rings (optional) Keeps blades from damaging the deck.


Specifications & Capacities RCM4615
Horsepower range 50 - 200
Gearbox horsepower 540 rpm or 1000 rpm
250 hp Divider
210 hp Center & Wings
Gearbox lubrication Gear Lube 80-90W EP
Gearbox oil capacity Splitter: 5.5 pints; Center deck & Wings: 10 pints
Cutting capacity 3 1/2"
Machine weight
Total weight
Tongue weight

4,550 lbs. (Includes 6 Laminated tires, single chains, and no deck rings.)
1,650 lbs.
Blade tip speed
At 540 rpm
At 1000 rpm

Center blades = 16,300 fpm & Wing blades = 16,300 fpm
Center blades = 16,288 fpm & Wing blades = 16,000 fpm
Hitch types Optional Self-Leveling Clevis Hitch, LP Performance Hitch,
Bar-Tite Hitch, Pintle Hitch, or Ball Hitch
Hitch jack Standard (7,000 lbs.)
Cutting width
Overall width
Minimum transport width
15'-11 3/4"
7'-11 3/4"
Overall length 15'-6" (With center deck raised fully up)
Deck height 12"
Cutting height 2" - 14"
Lift hydraulics 3" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers
Wing hydraulics 3" x 12" hydraulic cylinders, hoses & fittings
Wing transport protection Wing transport Locks
Deck material thickness 10 gauge
Side skirt thickness 1/4"
Skid shoes
Wing deck
Center deck

1 Replaceable shoe per wing
2 Replaceable shoes
Blades - 6 (2 per Carrier) 1/2" x 5" Heat treated
Free Swinging Alloy Steel with Uplift
Blade overlap 6"
Blade bolt Keyed with hardened flat washer & locknut
Stump jumper / Blade holder 3/16" Thick round dish shaped pan, reinforced with 1" x 5" blade bar
Deck ring Optional 3/8" x 4 1/2"
Front & rear guards Optional single row chain or dual row chain
Input driveline ASAE Cat. 6 with constant velocity u-joint
Intermediate driveline Standard - Category 5 with Slip-Clutch
Wing drivelines Standard - Category 4 with Slip-Clutch or optional Category 5 with Slip-Clutch
Wheel options 6" x 21" Laminated tires, 25.5" new tire with or without foam fill,
29" x 16 ply used aircraft tires without foam filling.
Number of wheels 6 - Wheel option: 4 on transport axle and one on each wing axle
8 - Wheel option: 4 on transport axle and two on each wing axle
Transport axle Spring-cushioned on trailing arms
Hubs Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts.
Color options Standard color: Beige; Optional colors: Red, Green, Orange, or Yellow.