|Surpassed rugged industry standards
|All Land Pride Rotary Cutters have been designed and tested and meet rigorous voluntary testing procedures according to ISO 4254-13.
|Saves customer set-up time and money. Adjustments should always be made by dealer.
|7 Year gearbox warranty*
|Shows confidence in gearbox integrity. Years 6 & 7 parts only
|250 HP divider gearbox 210 HP center & wing gearboxes
|Rugged heavy-built gearboxes capable of handling heavy-cutting applications.
|Gearbox seal protection
|Gearbox bottom seal protection for longer bearing life.
|2 3/8" Output gearbox shaft
|Large output shaft handles shock loads better.
|Input driveline: Cat. 6 CV or Cat. 5 Conventional
|Holds up to shock loads and harsh mowing conditions.
|Easy greasable drivelines
|Drivelines have access holes for greasing the U-joints and to grease the inner profiles.
|4 Plate slip-clutch
|Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline when impacts are encountered.
|High blade tip speed
|Allows clean cutting of material & even distribution. See Specifications for actual FPM.
|6" Blade overlap
|Eliminates skipping during turns.
|Good cutting capacity
|Can cut brushy areas with saplings up to 3".
|13" Deck height
|Handles heavy cutting, which reduces balling-up of cut material under the deck.
|Diamond shaped blade holder
|Heavy diamond shaped blade holder for protecting the gearbox seal and gearbox output shaft. Can hold up to tough conditions.
|Dishpan provides extra protection against stumps and other protrusions. Excluding the dishpan eliminates grass/dirt buildup which can cause vibration.
|Spindle Nut Protected
|Spindle nut and threads extending beyond the nut are guarded to protect against damage from hitting solid objects.
|Shredder Blade Kit (Optional)
|Ideal for cutting residue into smaller pieces. Replaces standard blade bar/dish configuration.
|10 gauge smooth deck top
|Reduces accumulation of debris and is easier and faster to clean.
|1/4" side skirt
|Reduces debris piercing possibilities.
|Reduces drawbar wear by keeping hitch level while going through ditches.
|Hinged wing sections
|Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
|1" Solid hinge rods
|Larger diameter hinge gives greater strength to cutter and hinge area.
|Wing transport locks
|Holds transport wings in the folded-up position in case of hydraulic pressure loss.
|Enclosed front to rear dual leveling rods
|Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod.
|5-Bolt hubs makes the wheel assembly more durable and longer lasting.
|Drain holes in wheel rims
|Allows water to drain from wheels mounted on folded-up wings. Helps prevent paint deterioration and rusting to the wheel rims.
|Spring-cushioned center axle
|Protects unit from bumps and ground shock, cushions loads on drawbar.
|Replaceable wheel spindles
|Wheel spindles can be replaced when damaged without replacing the entire axle. mply remove one bolt to replace damaged spindle.
|Rephasing lift cylinders
|Allows cutter to be leveled using hydraulic cylinders versus mechanical turnbuckles.
|7/8" Leveling rods
|Large diameter leveling rods provide superior supporting strength over rough terrain.
|LP Performance Hitch option
|Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar.
|Bar-tite hitch option
|Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
|Roadway light kit option
|Allows operator to transport on public roads safer when headlights are turned on and/or when flasher lights are turned on.
|Laminated tires: Eliminates flats.
Air-filled tires: Give better cushion while transporting.
Foam-filled tires: Give better cushion while transporting & can’t go flat.
|Deck rings (optional)
|Keeps blades from damaging the deck.