Land Pride RCF2072
Features
FEATURES | BENEFITS |
Surpassed rugged industry standards | All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI. |
5 Year gearbox warranty | Shows our confidence in the gearbox integrity. |
Gearbox Seal Protection | Gearbox bottom seal protection for longer bearing life. |
Cat. 3 driveline with shear-bolt Option | Shear-bolt offers maximum driveline protection. |
Cat. 3 driveline with 2-plate slip-clutch Option | Slip-clutch driveline offers convenience for continual work. |
Dual position clevis type 3-Point floating top link | Permits deck to follow the terrain for an even cut. |
Lower clevis type 3-Point hitch | Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design. |
Heavy 10 gauge deck & side skirt construction | Can withstand more abuse than lighter gauge decks. |
Box tubing deck supports | Makes for a stronger rigid deck. |
Fully welded deck | Adds additional strength. |
Extended cutter front | For increased material flow and added protection. |
Round back design | Helps discharge grass better than enclosed or partially enclosed cutters. |
Deck Height | 9 11/16" Deck height on 60" and 11" deck height on 72" model Allows cutter to handle heavy cutting conditions. |
1 1/2" to 12" Cutting height | Provides for a wide range of cutting conditions. |
Full length skid shoes | Provides sidewall reinforcement and full protection to bottom of sidewall. |
1/2" x 3" Heat-treated free swinging blades | Free swinging protects from obstructions. Heat-treated offers longer life. |
Splined blade bar hub | Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft. |
10 Gauge stump jumper | Standard round stump jumper slides over stumps, rocks and debris. |
High blade tip speed | Ensures clean cut. |
15" Laminated tailwheel | Laminated material is long lasting in rough conditions. Can't go flat. |
4" x 16" Solid rubber tailwheel | Can't go flat. |
1 1/4" Heavy-duty spindle on tailwheel | Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly. |
Optional Guarding | Protect against flying debris. Customer can choose to include single chain or rubber guarding on the front and back. Rear Metal Band standard on the back. |
Driveline Holder | Keeps driveline up out of dirt. Easier hook up of driveline. |
Specifications
Model Numbers | RCF2072 |
Machine Weight | 745 lbs (337.9 kg) With laminated tailwheel, slip clutch driveline, Front Rubber Guards and Rear Metal Band. |
Hitch | Category l with floating top linkage, Quick Hitch ready |
Cutting Width | 72" (1.83 m) |
Overall Width | 77" (1.96 m) |
Overall Length | 109 1/2" (2.78 m) |
Deck Height (Bottom of Deck to Bottom of Skid Shoe) |
11" (27.9 cm) |
Cutting Height | 1 1/2" to 12" (3.8 cm to 30.5 cm) |
Cutting Capacity | 2" (5.1 cm) Diameter |
Recommended Tractor hp | 20-65 hp (14.9-48.5 kw) |
Power Take-Off Speed | 540 rpm |
Gearbox Ratio | 1:1.47 |
Gearbox Construction | Speed-up beveled gears, cast iron housing, 1 3/8" (3.5 cm) - 6 spline input shaft and 2" (5.1 cm) output shaft |
Gearbox Lubricant | EP 80-90W oil |
Gearbox oil Capacity | 4 Pints (1.89 L) |
Deck Construction | All welded deck |
Deck Material Thickness | 10 Gauge (.134")(3.4 mm) |
Side Skirt Material Thickness | 10 Gauge (.134")(3.4 mm) |
Skid Shoes Standard Accessory | Full length weld-on skid shoes 1/4" x 2 1/2" x 18 7/16" (6 mm x 6.4 cm x 46.8 cm) Long bolt-on replaceable skid shoes (Bolts to weld-on skid shoes) |
Stump Jumper | 10 GA. x 24" (3.4 mm x 61.0 cm) Round Pan with 1" (2.5 cm) thick blade holder bar |
Blades (2) | 1/2" x 3" x 31" (13 mm x 7.6 cm 78.7 cm) Heat treated alloy steel free-swinging high lift |
Blade Bolts | Keyed with harden flat washers & locknuts. |
Blade Tip Speed | 14,955 FPM (76.0 mps) |
Driveline | ASAE Category 3 |
Driveline Protection Optional Optional | Shearbolt protection 2 Plate slip clutch |
Tailwheel Mount | Welded A-arm and caster fork with 360 degree swivel |
Tailwheel Optional Optional | 4" x 8" x 15" Laminated tire with cast iron hub 4" x 16" Molded rubber tire |
Front Guard Optional Optional | Rubber Belting Single Chain Guard |
Rear Guard Standard Optional Optional | Metal Band Rubber Belting Single Chain Guard |