Honda WSP33
Features
1/3hp, 115V submersible pump
115 Volt operation allows the pump to be plugged into a standard outlet. (GFCI is recommended).
Ideal for draining basements, window wells, garden irrigation, decorative fountains and more
40 gal./min capacity
Rated for continuous use
Operates on continuous duty in temperatures of up to 104°, and intermittent duty up to 140°. Since this pump can be used 7 days a week, 24 hours a day, it is suitable for any application that needs to move water from one place to another on a continuous basis.
Solids handling up to 3/8"
Move slurry and dirty liquids without the worry of damaging the pump.
Lightweight durable stainless steel casing
The pump won’t rust or corrode, minimizing costly repairs and replacement. The 304 stainless steel is an industrial grade, again minimizing damage and reducing the need for repairs.
Automatic non-mercury float switch
Honda submersible pumps use a mechanical float switch instead of mercury, eliminating the use of hazardous materials in the pump.
Built in thermal reset switch
If the pump overheats, it automatically resets itself after the pump cools down. This is designed to protect the motor from periodic overheating.
20 foot heavy duty cord
Top discharge
Great for applications where space is tight.
Operates fully or partially submerged
No need to worry about the water level for the pump!
Shielded ball bearings for added durability
Shielded ball bearings, both top and bottom, add significantly to the longevity of the pump.
Efficient air-insulated motor
Oil lubricated double mechanical seals
Oil lubricated double mechanical seals prevent damage to the seal if the pump is run dry.
Specifications
Pump Type | Submersible Standard |
Starting Type | Automatic |
Casing | Stainless Steel |
Motor (HP) | 1/3 |
Voltage | 115 |
Starting amps | 10 |
Running amps | 4 |
Duty | Continuous |
Motor insulation | Class F |
Overhead protection | Built-In Thermal Automatic Reset |
Discharge Type | Top |
Discharge capacity | 40 gpm |
Max. head (feet) | 23 |
Port diameter ( inches) | 1.25 FNPT |
Maximum pressure | 10 psi |
Solids handling | 0.375" |
Impeller | Thermo Plastic Noryl |
Seals | Single Carbon/Ceramic lower mechanical seal, rubber single lip upper seal |
Cord length (feet) | 20 |
Cord type | Heavy-Duty 115V |
Dimensions (WxH) | 6.4" x 10.3" |
Pump diameter | 6.4" |
Dry weight | 11 lbs. |