Land Pride RCR1884
Features
Features | Benefits |
Surpassed rugged industry standards |
All Land Pride Rotary Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI. |
90 Hp gearbox | A rugged heavy built gearbox capable of handling heavy cutting applications. |
5 Year gearbox warranty | Shows our confidence in the gearbox integrity. |
Cat. 4 driveline with 2-plate slip-clutch |
Slip-clutch driveline offers convenience for continual work. |
Cat I or Cat II Hitch Quick-Hitch Capability |
Permits deck to follow the terrain for an even cut. Quick-Hitch provides for fast hook-up. |
Lower clevis type 3-point hitch |
Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design. |
84" Cutting width | Wide cutting width, Reduces cutting time in the field. |
Heavy 10 gauge deck construction |
Can withstand more abuse than lighter gauge decks. |
Box tubing deck supports | Makes for a stronger rigid deck. |
Fully welded deck | Adds additional strength. |
Extended cutter front | For increased material flow and added protection. |
Round back design | Helps discharge grass better than enclosed or partially enclosed cutter. |
9 1/2" Deck Height | Allows cutter to handle heavy cutting conditions. |
2" to 11" Cutting height | Provides for a wide range of cutting conditions. |
1/4" x 2 1/2" Full length skid shoes |
Provides sidewall reinforcement and full protection to bottom of sidewall. |
1/2" x 4" Heat-treated free swinging blades |
Free swinging protects from obstructions. Heat-treated offers longer life. |
Splined blade bar hub | Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft. |
10 Gauge stump jumper | Standard oval stump jumper slides over stumps, rocks, and debris. |
High blade tip speed | Ensures clean cut. (17,113 FPM) |
2" Cutting capacity | Can aid in cleaning brush |
Available with single or dual tailwheels |
Dual tailwheels offer greater stability in uneven terrain. |
15" Laminated tailwheel | Laminated material is long lasting in rough conditions. |
Heavy-duty spindle on tailwheel |
Tailwheels take a beating, 1 1/4" spindle gives the strength to protect tailwheel assembly. |
Guarding | Protect against flying debris. Customer must choose to include chain or rubber on the front and rear. Rear Metal Band standard. |
Driveline Holder | Keeps driveline up out of dirt. Easier hook up of driveline. |
Specifications
Machine Weight with Front Rubber Guard and Rear Metal Band) |
851 lbs. without driveline |
Hitch | Category l or Category II, Quick-Hitch Ready |
Cutting Width | 84" |
Overall Width | 89" |
Overall Length with Tail Wheel | 135 1/8" |
Deck Height (Bottom of Deck to Bottom of Skid Shoe) |
9 1/8" |
Cutting Height | 2" - 11" |
Cutting Capacity | 2" Diameter |
Recommended Tractor Horsepower | 45 - 90 horsepower |
Power Take-Off Speed | 540 rpm |
Gearbox Horsepower Rating | 90 horsepower |
Gearbox | 1:1.44 Speed-Up Beveled Gears with Cast Iron Housing |
Gearbox Lubrication Capacity & Type | 7 Pints of 80-90W EP Gear Lube |
Gearbox Input/ Output Shaft Size | Input Shaft = 1 3/8" - 6 Spline Output Shaft = 2" Dia. |
Deck Construction | All welded deck |
Deck Material Thickness | 10 Ga. |
Skid Construction | Standard 1/4" x 2 1/2" welded on |
Stump Jumper | Oval 10 ga. Pan |
Blades (2) | 1/2" x 4" Heat Treated Alloy Steel Free-Swinging High Lift - Low Friction |
Blade Bolt | Keyed with harden flat washer and locknut |
Blade Tip Speed | 17,113 fpm |
Driveline | ASAE Category 4 |
Driveline Protection | Slip Clutch |
Tailwheel Mount Assembly | Welded arm and Caster Fork |
Tailwheel | 4" x 8" x 15" Laminated Tire |
Front Guard | Optional: Rubber Guard or Chain Guard |
Rear Guard | Standard: Metal Band Optional: Chain Guard |